Il più grande SA-54 con piatto di taglio da 54" e motore V-Twin. Esperienza di guida confortevole con sedile progettato ergonomicamente. Ideale per grandi aree commerciali.
L'extra ampio piatto di taglio da 54 pollici con 3 lame copre il massimo terreno per passaggio per la massima produttività.
Il potente motore V-Twin OHV a 4 tempi da 803cc eroga 26CV a 3600 giri/min per lavori commerciali impegnativi.
Il sedile ergonomico premium con protezione antivibrazione garantisce un funzionamento confortevole anche durante lunghe giornate di lavoro.
Regolazione dell'altezza a manopola con 15 livelli da 25-114mm per una falciatura versatile su qualsiasi terreno.
The 54-inch three-blade deck covers about 17 percent more width per pass than the 46-inch model, ideal for estates, large gardens and tree-lined properties.
Parks departments and grounds contractors use the SA-54 for open green areas where speed, deck width and driver comfort decide the daily output.
The 15-gear chassis lift adjusts the three blades between 25 and 114 mm - fine enough for a striped finish, high enough for meadow growth.
Wide 20 x 12 inch rear tyres and 318 kg of machine weight keep the SA-54 planted at its 11.2 km/h top speed on rolling ground.
An 803 cc V-twin OHV engine (26 HP at 3600 rpm) drives the deck through an electronic PTO clutch and belt system. The V-twin layout runs smoother and with less vibration than a single-cylinder of the same class, which reduces driver fatigue over long sessions. Three blades give a more even cut distribution across the full 54-inch deck than a two-blade layout of the same width.
The knob-controlled 15-gear lift moves the deck between 25 and 114 mm. Fuel capacity is 13.2 litres, forward speed 11.2 km/h and reverse 5.6 km/h. The machine weighs 318 kg and measures 2100 x 1500 x 1300 mm packed - still transportable on a standard car trailer with ramps.
Contattaci per prezzi, disponibilità e consulenza nella scelta del modello giusto.
Confronto prezzi: Amazon, Temu, eMAG vs. SH-550B
Vai alla guida →