Rasaerba a lama piatta con 800mm di larghezza di taglio. Efficiente e potente, ideale per falciare erba alta, sterpaglia e vegetazione densa. Utilizza lame rotanti per sminuzzare la vegetazione in piccoli pezzi.
Il motore Loncin 452CC offre una potenza di taglio affidabile per le attività di falciatura più impegnative.
Conformità CE, EPA ed Euro5 per lo SH-800L 16HP: emissioni, sicurezza ed EMC verificati.
Copre più superficie per passaggio riducendo notevolmente il tempo di falciatura. Ideale per grandi proprietà e applicazioni commerciali.
Progettato per pendii fino a 50°: lo SH-800L tiene la lama da 800 mm orizzontale dove i trattori con ruote perdono aderenza.
An 800 mm deck, 16 HP engine and 50-degree slope rating cover most professional tasks - verges, parks, orchards, cemeteries - with one machine.
Crawler tracks and 0-50 degree gradient capability remove the need for string trimmers on banks and ditches, operated safely from up to 500 m.
At 1100 x 1180 x 580 mm the SH-800L balances cutting width and manoeuvrability for gardens and grounds with trees and obstacles.
Electric start, 2500 W generator and 24V/20.5Ah x 2 batteries mean quick starts and long sessions with minimal downtime.
The SH-800L uses the same 452 cc Loncin 16 HP powertrain as the SH-800DL: the engine drives a 2500 W generator, which supplies two 1000 W drive motors and the cutting system, with a 24V / 20.5Ah x 2 battery pack as buffer. Electric start is standard, travel speed is 0-4 km/h and cutting height is adjustable from 1 to 20 cm.
Engineering rubber tracks handle gradients of 0-50 degrees, and the 1100 x 1180 x 580 mm chassis stays nimble around trees and beds. The remote control reaches 500 m with high and low speed settings - the operator directs the machine from firm ground while the mower works the slope.
Contattaci per prezzi, disponibilità e consulenza nella scelta del modello giusto.
Confronto prezzi: Amazon, Temu, eMAG vs. SH-550B
Vai alla guida →